Oxides with a high dielectric constant obtained using atomic layer deposition (ALD) and their use in electronics
- Author
- Sylwia Aldona Gierałtowska
- Year
- 2014
- Language of the thesis
- Polish
- Thesis name in original language
- Tlenki o wysokiej stałej dielektrycznej otrzymywane metodą osadzania warstw atomowych (ALD) i ich zastosowania w elektronice
- Abstract & Cover
- University
- Institute of Physics, Polish Academy of Sciences, Warsaw, Poland (Warsaw, Poland)
- External Link
- Read Thesis
As part of the dissertation, a structural, electrical one was conducted and optical characterization of dielectric layers and test elements electronic (MOS, TFC and TFT types), using these in their construction materials. Based on an analysis, based on the results extensively extensive research (XRD, AFM, SEM, TEM, EDX, SIMS, interferometry, ellipsometry, electrical methods: Hall effect, I (V), C (V)) unique technology has been developed obtaining the following dielectric materials: Al2O3, HfO2, ZrO2, TiO2, as well as their composite layers at low growth temperatures (even <100˚C) by atomic layer deposition. In order to select the most favorable parameters technological production of thin dielectric layers with properties required for use as insulators in electronic structures, I used about 500 samples made by me in the growth processes. Insulating layers were obtained as a result of repetitive technological processes characterized by a smooth surface, amorphous structure, strength dielectric above 4 MV / cm and the leakage current remaining at the level about 10-8 A / cm2, a relatively high value of the relative electric permeability (HfO2 - 21 ± 3, ZrO2 - 23 ± 3, Al2O3 - 10 ± 3, TiO2 - 40 ± 3, composite layers - 19 ± 3) and a wide energy gap above 3 eV. Very good quality of the respondents dielectric layers confirm the relative permittivity values electrical, refractive index and the value of the width of the gaps energy that are close to the dielectric constants (static relative permittivity), refractive indices and width bandgaps obtained for the corresponding dielectrics in the form crystals. Introduced in the current work, a new layer embedding concept dielectrics at temperatures below 100˚C has been the subject of three applications patents. It enables the construction of properly functioning elements electronics containing insulators in interaction with various materials semiconductors such as: Si, GaAs, ZnO, and also graphene, described herein work, as well as SiC10, GaN11, GaMnAs165 and GaN / AlGaN12 structures. Carried out Research has shown that composite layers are the most efficient insulators consisting of hafnium dioxide and alumina. These kinds of insulating layers used in the construction of TFC and TFT thin-film electronic structures based on semiconductor zinc oxide layers, also obtained by the ALD method at low temperatures (<200 ° C). Test manufactured components exhibit reproducible electrical properties. Use of one technique growth, in this case ALD technology for the production of key components test electronic components (semiconductor and insulating layers), no to significantly simplify the technology of manufacturing semiconductor devices. It is worth noting that the obtained TFT structure is the first reported in the literature where the channel, insulator and gate were made by the method ALD at a temperature not exceeding 150˚C. ALD is a cheap technology, and since it does not require high-temperature annealing processes, it can be carried out on thermally unstable organic materials. The obtained electronic structures show high transmission, on average more than 85% in the visible range of the electromagnetic spectrum. Based about the results presented, it seems that the combination of low production temperature and the transparency of the structures makes electronic components using oxides semiconductor (ZnO) and dielectric ("high - k"), made using the ALD technique, they are solid, real, safe for the environment (no harmful compounds) and a very promising proposition for the next transparent generation and flexible electronics. Oxides of high dielectric constant obtained by the ALD method, being the subject of research of this doctoral dissertation, they combine the desired parameters optical, electrical and structural. Manufacturing technology developed dielectrics means that there are wide possibilities of their applications, not only as insulators in electronic devices, but also as materials of variable resistance in semiconductor memories, as optical coatings with different refractive indexes in lasers and microscopes, or as active light-converting layers in photovoltaic structures. Research on the properties of dielectric layers and technological solutions proposed in the paper will be used as an introduction to later research thin-film electronic components (TFT and TFC) on flexible substrates based on zinc oxide or graphene. Currently, research in this area is focused on the production of the best quality displays41. In addition to the numerous advantages of this new thin-film component technology electronic produced on transparent substrates, as the ability to providing real solutions, and overcoming the obstacles and limitations of conventional silicon technology, the materials used as well as the same technology is environmentally friendly, efficient and inexpensive. Fig. 6. 1 Display market development forecast - basic profit according to a research company Displaybank200. Although such thin film electronic components require larger ones power consumption than those produced by traditional MOS technology, is the future "Transparent electronics" seems very promising. According to the last one available Displaybank market forecast 200, sale transparent displays, which debuted in the market in 2012, will be grew rapidly and will reach $ 87 billion in income by 2025.
