Towards a Model System for Lamellar Magnetism by Atomic Layer Deposition
- Author
- Jon Einar Bratvold
- Year
- 2019
- Abstract & Cover
- Source of Information
- Henrik H Sønsteby
- University
- University of Oslo (Oslo, Norway)
- External Link
- Read Thesis
This thesis describes how atomic layer deposition (ALD) can be used to produce model systems of magnetic heterostructures. In particular, one objective has been to mimic naturally formed minerals with multilayers of Fe2O3 (hematite) and FeTiO3 (ilmenite) with nanosized dimensions. Such structures exhibit exotic magnetic phenomena, like strong and extremely stable natural remanent magnetization, self-reversed thermoremanent magnetization and exchange bias. The peculiar magnetic properties of these minerals originate from the interfaces of the layered nanostructure rather than from the individual materials themselves. Manufacture of such lamellar structures in a controllable manner is not straightforward. ALD is shown to be a good candidate for the task, as the technique enables deposition of uniform films over larger areas, with excellent control of composition and thickness. A prerequisite for successful ALD growth is well-behaving processes for the individual oxide materials. Direct deposition of FeTiO3 proved challenging, due to lack of an ALD process that yields films containing only divalent iron. As an alternative, a model system with NiTiO3 instead of FeTiO3 was developed to study the effects of interfaces and nanolayering. This in turn, prompted us to establish a process for NiTiO3 by ALD. The magnetic structure of NiTiO3 is very similar to FeTiO3, however, with magnetic moments aligned perpendicular rather than parallel to the crystallographic c axis. To explore the magnetic phenomena, films with a (001) orientation is desirable, as the cation layers in the natural ilmenite type minerals are stacked along [001]. NiTiO3 films were deposited on several different single crystal substrates and their crystallographic correlation with the substrates have been mapped. Highly epitaxial films of NiTiO3 on Al2O3(001) were obtained, as also previously observed in our group for growth of Fe2O3 on the same type of substrates. Based on the processes for producing epitaxial films of Fe2O3 and NiTiO3 on Al2O3(001) at hand, multilayered structures were deposited. To record magnetic features from the constituents of the multilayered film, single layered samples of Fe2O3 and NiTiO3 were also prepared and characterized. Distinct features at low temperature not present in single layered films were observed, but the origin of these features were not conclusively identified. An Fe(II) precursor completely new to ALD was explored: Fe(hfa)2•TMEDA. Different co-reactants were tested, and a self-limiting process using oxalic acid was established. XPS investigations confirmed the preservation of the +2 oxidation state of Fe from precursor to film. This represents the first direct deposition of solely Fe(II) containing films by ALD. However, this process is not suitable for direct deposition of FeTiO3. Finally, a multilayered oxide film containing Fe(II) and Ti(IV) was deposited, with the target to obtain FeTiO3 (ilmenite) after post-deposition annealing. XPS confirmed Fe(II) in the film, and XRD supported the presence of epitaxial FeTiO3 on Al2O3(001), after annealing. The successful formation of FeTiO3 represents one of the two constituents in the natural hematite/ilmenite minerals, while the study of multilayered Fe2O3/NiTiO3 films act as a model system to study lamellar magnetism.
