Thermochemical transformations in the heterogeneous system "magnesium hydrosilicate nanotubes – titanium tetrachloride and water vapours and hydrogen chloride"

Author
I.S. Bodalyov
Year
2016
Language of the thesis
Russian
Thesis name in original language
ТЕРМОХИМИЧЕСКИЕ ПРЕВРАЩЕНИЯ В ГЕТЕРОГЕННОЙ СИСТЕМЕ "МАГНИЙГИДРОСИЛИКАТНЫЕ АНОТРУБКИ — ПАРЫ ТЕТРАХЛОРИДА ТИТАНА, ВОДЫ И ХЛОРОВОДОРОД"
Abstract & Cover

In this work, structural and chemical transformations occurring during the synthesis of titanium oxide nanostructures on nanotubular magnesium hydrosilicate Mg3Si2O5(OH)fourby alternating its treatment with titanium tetrachloride and water vapors according to the method of molecular layering under various temperature-time conditions of preliminary annealing and modification, including as a result of the interaction of the matrix with hydrogen chloride, a by-product of molecular layering. Proposed model magnesium hydrosilicate at temperatures up to 500 °C, according to which the release of constitutional water occurs with the formation of coordinatively unsaturated centers (||Mgδ+, ||Oδ−) and the advancement of the reaction front from the outer surface to the axis of the nanotube as the temperature rises. During the subsequent treatment of nanotubes with titanium tetrachloride vapors, it interacts as with the initial hydroxyls of the matrix according to the proton substitution scheme with the formation of ||OnTiCl4 −n and the release of hydrogen chloride into the gas phase, and with centers (||Mgδ+, ||Oδ−), to thermal dehydroxylation nanotubes twenty which are added without evolution of gaseous products of the group (||MgCl, || OTiCl3). It has been shown that an increase in the chemisorption temperature from 150 to 200°C leads to an increase in the titanium content in the modified samples, which is due to the formation of new active centers on the surface as a result of the diffusion of protons and oxygen anions from the deep serpentine layers of the nanotube wall through defects in the crystal lattice. At 300 and 400 °C, along with isolated groups ||On TiCl4 −n crystalline particles of titanium dioxide are formed. It has been demonstrated that their formation is caused by the reaction of TiCl moleculesfourand titanium chloride groups with water molecules released from the matrix as a result of its chemical dehydroxylation under the action of hydrogen chloride, a by-product of titanium tetrachloride chemisorption. It has been established that as a result of repeated (up to four times) alternating treatment of chrysotile with titanium tetrachloride and water vapors in selected temperature conditions (annealing at 400°C, chemisorption at 150 and 200°C, hydrolysis at 400°C) on the surface of nanotubes that retain their morphology (and at 150 °C also the crystal structure), a chemically fixed X-ray amorphous titanium oxide layer of adjustable thickness is formed. In the course of further work, it is important to evaluate the chemical nature of the modifier and its concentration in hydrosilicate nanotubes for their properties in relation to the technology of sorbents, catalysts, sensors, composite materials, and other areas of modern solid-state materials science. 

В работе исследованы структурно-химические превращения, протекающие в процессе синтеза титаноксидных наноструктур на нанотубулярном гидросиликате магния Mg3Si2O5(OH)4 путём его попеременной обработки парами тетрахлорида титана и воды по методу молекулярного наслаивания при различных температурно- временных режимах предварительного отжига и модифицирования, в том числе в результате взаимодействия матрицы с хлороводородом — побочным продуктом молекулярного наслаивания. Предложена модель термического дегидроксилирования нанотрубки гидросиликата магния при температурах до 500 °C, согласно которой выделение конституционной воды происходит с образованием координационно-ненасыщенных центров (||Mgδ+, ||Oδ−) и продвижением фронта реакции от наружной поверхности к оси нанотрубки по мере повышения температуры. При последующей обработке нанотрубок парами тетрахлорида титана он взаимодействует как с исходными гидроксилами матрицы по схеме замещения протона с образованием групп ||OnTiCl4 − n и выделением хлороводорода в газовую фазу, так и с центрами (||Mgδ+, ||Oδ−), к 20 которым присоединяются без выделения газообразных продуктов группы (||MgCl, ||OTiCl3). Показано, что повышение температуры хемосорбции от 150 до 200 °C приводит к росту содержания титана в модифицированных образцах, что обусловлено формированием на поверхности новых активных центров в результате диффузии протонов и анионов кислорода из глубинных серпентиновых слоёв стенки нанотрубки по дефектам кристаллической решётки. При 300 и 400 °C наряду с изолированными группами ||OnTiCl4 − n образуются кристаллические частицы диоксида титана. Продемонстрировано, что их образование вызвано реакцией молекул TiCl4 и титанхлоридных групп с молекулами воды, выделяющимися из матрицы в результате её химического дегидроксилирования под действием хлороводорода — побочного продукта хемосорбции тетрахлорида титана. Установлено, что в результате многократной (до четырёх раз) попеременной обработки хризотила парами тетрахлорида титана и воды в выбранных температурных режимах (отжиг при 400 °C, хемосорбция при 150 и 200 °С, гидролиз при 400 °С) на поверхности нанотрубок, сохраняющих свою морфологию (а при 150 °C — также и кристаллическую структуру), формируется химически закреплённый рентгеноаморфный титаноксидный слой регулируемой толщины. В ходе дальнейшей работы важно оценить химической природы модификатора и его концентрации в гидросиликатных нанотрубках на их свойства применительно к технологии сорбентов, катализаторов, сенсоров, композиционных материалов и другим областям современного твердотельного материаловедения. 

Source of Information
Malygin Anatoly + updated by Ivan
University
Saint-Petersburg State Institute of Technology
(Saint Petersburg, Russia)
Other notes
Supervisors: Malygin A. A., Malkov A. A.
External Link
Read Thesis
LinkedIn
linkedin invite