Surface and Interface Engineering of Carbon Nanotubes with Metal Oxides Deposited via Atomic Layer Deposition
- Author
- Carlos Ramón Guerra Nuñez
- Year
- 2018
- Abstract & Cover
- University
- ETH Zurich/EMPA (Thun, Switzerland)
- Other notes
- https://www.research-collection.ethz.ch/bitstream/handle/20.500.11850/337267/SurfaceandInterfaceEngineeringofCarbonNanotubeswithMetalOxidesDepositedviaAtomicLayerDeposition.pdf?sequence=1&isAllowed=y
- External Link
- Read Thesis
The deposition of thin films via atomic layer deposition (ALD) relies on the adsorption of gas precursor molecules to surface functional groups and the eventual chemisorption to the substrate. The resulting adsorbates form a new reactive surface for the subsequent gas precursor molecules to react with, leading to the nucleation and growth of a film. Most of the physicochemical properties of thin films depend on these two processes: on the nucleation and growth. These processes will define the substrate’s surface coverage, chemical composition, crystal structure, density, thickness, and surface morphology of the film. All these aspects need to be controlled in order to engineer the surface of the coating film and the interface with the parent material for a specific application. This is particularly challenging when the substrate material possesses an inherent chemically inert surface such as in the case of sp2 carbon materials, where the absence of surface functional groups inhibit the growth of an often-desired homogenous and conformal coating. Carbon nanomaterials such as graphene and carbon nanotubes (CNTs), as with many other nanomaterials, often require a thin film coating to preserve, improve, or develop new physical-chemical properties. In this thesis we investigated the nucleation and growth behavior of two common metal oxides, namely titanium oxide and aluminum oxide deposited via ALD on different types of carbon nanotubes. In order to study the nucleation behavior of metal oxides, we developed an in-situ Raman spectroscopy-ALD setup to measure different types of CNTs during the metal oxide thin film deposition. We demonstrated that the deposition temperature could influence the nucleation behavior of metal oxides, which in turn modifies the surface coverage and homogeneity of the growing film. The precursor molecules initially chemisorb only on defect sites, and the resulting adsorbate serves as an anchor for the film to grow simultaneously in the radial (2D) and vertical direction (3D). The substrate temperature determines the (2D) radial growth-rate-per-cycle (rGPC). Low growth temperatures of < 120 °C, led to a faster radial film growth along the carbon surface than it does in volume. Consequently, films deposited at these low temperatures tend to be continuous and homogeneous on carbon materials. For growth temperatures above 120 °C, the nucleation proceeds mainly in volume with slower radial growth rates. The nucleation and growth behavior therefore dictates the surface coverage, morphology and crystal structure of the growing thin film, which can be controlled by adjusting the temperature during the nucleation and growth stages. Furthermore, we have established that during growth, the main source of contamination is hydrogen coming from unreacted hydroxyl groups. In order to explain this phenomenon, we developed a geometrical model to explain how the precursor molecules chemisorb with the surface and subsequently rearrange during growth. We demonstrate how the adsorbate rearrangement during growth can determine the concentration of unreacted hydroxyls, the film density, and the growth-per cycle. To conclude, we then showed the importance of surface and interface engineering with ALD to improve the overall properties of the parent carbon material. For this, we used TiO2 films as barrier recombination layers on CNT photoanodes to fabricate dye-sensitized solar cells.
