Sum-frequency generation study of the surface chemistry during atomic layer deposition

Author
V. Vandalon
Year
2017
Abstract & Cover

Atomic-layer deposition (ALD) is a state-of-the-art technique for the synthesis of ultrathin films. A key selling point of ALD is its unique capability to deposit highly uniform and conformal films with sub-nanometer thickness control. As such, ALD is an enabling step in the fabrication of nano-electronic com ponents in devices such as logic and memory chips. In the process of ALD, material is deposited by a sequence of two or more self-limiting surface reac tions. These self-limiting surface reactions rule the growth during ALD and lend the process many of its unique properties. A fundamental understanding of the growth mechanism of ALD is needed to keep up with the ever increasing requirements from industry. Therefore, in-situ analysis techniques capable of monitoring the surface chemistry during ALD are vital. In this dissertation, the surface chemistry of ALD was studied by broad band sum-frequency generation (BB-SFG) spectroscopy. BB-SFG spec troscopy originates from the field of surface science and probes the vibrational transitions of surface groups. It is uniquely suited to monitor the surface chem istry due to its inherent surface selectivity and sub-monolayer sensitivity. In this work, BB-SFG spectroscopy was used to study the surface chemistry dur ing ALD for the first time. A BB-SFG spectroscopy setup was designed and built. Several limitations and practical considerations were identified during this process. For example, the BB-SFG signals obtained from the surface groups during the in-situ studies were extremely weak. The weak BB-SFG signal led to the fundamental problem that the non-resonant contribution from the silicon substrate, normally negligible, was dominating the spectral response. This was mitigated by exploiting two phenomena: Firstly, the BB-SFG signals could be enhanced using an optical cavity. Secondly, this non-resonant signal could be suppressed, due to its short decay time, by carefully timing the probing pulses. Subsequently, the surface chemistry of the prototypical processes of ALD of Al2O3 and ALD of Pt were studied with BB-SFG spectroscopy. The well understood steady-state growth mechanism of Al2O3 ALD, using Al(CH3 )3 as precursor and H2O as co-reactant, served as a starting point for assessing the capabilities of BB-SFG spectroscopy. The – CH3 and – OH surface groups rul ing the surface chemistry of this process could be monitored during ALD with sub-monolayer sensitivity. Although many details of this ALD process have been studied, several open questions could still be addressed with BB-SFG spectroscopy. For example, the fundamental mechanism responsible for the reduced growth at low temperatures was not yet fully understood. In this work it was found that at low temperatures some of the – CH3 groups are no longer reactive towards H2O, i.e. these groups are persistent. These persistent – CH3 groups limit the precursor uptake and therefore the growth. The presence of persistent groups under certain conditions is expected to be more general. This was illustrated by others who, as a result of this work, showed that per sistent groups also play a key role in ALD of zinc-tin-oxide. Moreover, for the Al2O3 ALD process, several other fundamental aspects were addressed such as the temperature dependence of the absolute – CH3 coverage, the reaction kinetics, and the sticking probabilities of the precursor and co-reactant. Next, the surface chemistry during initial growth of ALD of Al2O3 was studied on a SiO2 and a H terminated Si(111) starting surface. The reactivity of the initial TMA half-cycle on the SiO2 surface was found to be a factor of 4 lower than during steady state growth. On the other hand, all subsequent half-cycles showed behavior similar to that during steady-state growth. On the H terminated Si(111) surface the reactivity of TMA was found to be a factor of 2 lower than during steady-state growth. These subtle differences are in agreement with the commonly observed trends of virtually immediate growth on these two starting surfaces. The ALD process of Pt, using MeCpPtMe3 as a precursor and O2 as a co reactant, is seen as a model system for noble-metal ALD. The growth of noble metals by ALD in general is not completely understood and several questions about the underlying reaction mechanism remain. For the Pt ALD process, for example, the species of the hydrocarbon present on the Pt surface was unclear. With BB-SFG spectroscopy, direct evidence was found for the presence of – CH3 groups on the Pt surface during ALD. Furthermore, evidence was found for dehydrogenation of the hydrocarbon groups on the catalytic Pt surface. This confirmed a hypothesis made in earlier work based upon an analysis of the gas-phase reaction products and the trends reported in the surface science literature pertaining to dehydrogenation of hydrocarbon species on Pt. In conclusion, several new detailed insights into the growth mechanism of ALD were obtained with BB-SFG spectroscopy. The inherent surface selectivity of BB-SFG spectroscopy proved to be very valuable in this work and directly led to the observation of the persistent – CH3 groups. It was also demonstrated that a range of ALD chemistries on substantially different substrates can be studied. As such, this work can contribute to the adoption of nonlinear vi brational spectroscopy as a more widely used analysis technique in the field of ALD. Furthermore, the new insight presented in this work will stimulate a discussion about some nuances and hidden complexities of film growth by ALD

Source of Information
https://research.tue.nl/en/publications/sum-frequency-generation-study-of-the-surface-chemistry-during-at
University
Eindhoven University of Technology
(Eindhoven, Netherlands)
External Link
Read Thesis
LinkedIn
linkedin invite