Structural, optical, and electronic characterization of zinc oxide monocrystalline layers and zinc oxide nanostructures obtained by atomic layer deposition

Author
Łukasz Wachnicki
Year
2014
Language of the thesis
Polish
Thesis name in original language
Strukturalna, optyczna i elektryczna charakteryzacja warstw monokrystalicznych oraz nanostruktur tlenku cynku otrzymywanych metodą osadzania warstw atomowych
Abstract & Cover

Summary A key aspect of my work was the optimization of the crystallographic quality layers of zinc oxide at a relatively low growth temperature in the range of 200- 300 ° C by the ALD method. The layers obtained by me at a temperature of 200 ° C they are characterized by very good crystallographic quality. In the case of growth on the network-matched substrate (ZnO / GaN) half-width of the reflection curve for the 00.2 reflex it is 0.067 °, and the half-width of the reflection curve for the asymmetric reflex 20.1 is 0.425 °. Edge dislocation density is 108 cm-2, while the torsional dislocation density is in the order of 109 cm-2. The lattice constants are a = 3.2569 ± 0.0005 and c = 5.1978 ± 0.0005, which proves that the layers are fully relaxed. It is worth emphasizing that epitaxial zinc oxide layers are characterized by the above parameters without any additional heat treatment after growth. Compared to other research groups dealing with the increase in epitaxial zinc oxide width values the half reflection curve and the exciton line are very close to obtained by me in this dissertation, albeit an epitaxial increase in yes low temperature (200 ° C) has not been previously reported. In the next stage of my research work, I carried out optimization the process of zinc oxide growth, as a result of which I got two types nanostructures. Typically ALD structures require the use of special matrices that are etched after the growth process. ZnO nanowires, described in this work were made by the ALD method in the VLS growth fashion and by nucleation, without the use of additional matrices and digestion processes in acids. The obtained zinc oxide nanostructures show sensor properties on solvent and alcohol compounds, which can be used in sensors detecting dangerous substances, e.g. in airplanes or mines. On the simplicity of resetting this type of structure deserves special attention - none the need for heating or cleaning with chemical compounds. It's worth it also emphasize that the method of obtaining zinc oxide nanostructures may be easily implemented in industry and is a relatively cheap alternative to nanostructures produced by other growth methods. The research work presented in this doctoral dissertation meant that I am a co-author of over 50 papers published in the magazines from the list Philadelphia, including 5 as the first author, over 100 conference presentations and 13 patent applications. In addition, I have participated in over 30 conferences scientific research, where I gave 15 oral presentations, including one paper invited. A list of 50 publications and 12 patent applications has been published below. 

University
Institute of Physics, Polish Academy of Sciences, Warsaw, Poland
(Warsaw, Poland)
External Link
Read Thesis
LinkedIn
linkedin invite