Selective atomic layer deposition and etching of oxides

Author
A. Mameli
Year
2018
Abstract & Cover

With the continuing downscaling of the physical sizes of critical components in modern 3D semiconductor devices beyond the 10-nm technology node, pattern misalignments are likely to reduce the device yield to unacceptable levels. This is due to the difficulties in the positioning and shape retention of the patterns on the sample during each processing step in the manufacturing flowchart. A figure of merit to quantify the misalignment is the so-called edge placement error (EPE). Severe EPEs can lead to shorts or misconnections, thus resulting in poor device performance or malfunctioning. Meeting the ever stricter alignment specifications requires innovative solutions that can ensure atomic scale fidelity during material deposition or removal. Area-selective atomic layer deposition (ALD) provides Ångstrom level thickness control and can allow for bottom-up material deposition on pre-defined substrate areas. Atomic layer etching (ALE), permits in principle the same level of layer-by-layer control during the removal of a specific materials from certain substrate patterns with a high etch selectivity. Therefore, both techniques hold promises for reducing the number of manufacturing steps and for achieving (self-)aligned features or mitigating the EPE issues. The work in this thesis focuses on the development of area-selective ALD and selective ALE processes for several oxide materials (In2O3:H, ZnO, SiO2) and on gaining insights into the underlying reaction mechanisms. Chemoselective precursor or inhibitor chemisorption were exploited to achieve area-selective ALD of several oxides using thermal and also plasma-assisted ALD. Furthermore, the concept of chemoselectivity was also exploited to develop a novel method for isotropic ALE by making use of a plasma step. Area-selective ALD of In2O3:H (Chapter 4) and of ZnO (Chapter 5) was achieved on OH-terminated Si, in the presence of H-terminated Si substrate areas. Thermal ALD processes were employed in both cases. Micrometer-scale In2O3:H patterns were obtained by using a microplasma printer to locally convert H-terminated Si areas of a substrate into OH-terminated SiO2 areas, by local oxidation. This novel process could open up new options in the manufacturing flowcharts of flexible electronics and other devices (e.g., photovoltaics and displays) having pattern sizes in the order of ~100 µm. In addition, area-selective ALD of ZnO was achieved by local deposition of OH terminated SiO2 seed layer patterns on H-terminated Si-based films, using e-beam induced deposition (EBID). In this way, the area-selective ALD of ZnO was proven feasible for pattern sizes down to ~100 nm scale. The nucleation of these films was investigated by in-situ spectroscopic ellipsometry and the selectivity was demonstrated by means of chemical (X-ray spectroscopy methods) or structural (SEM and TEM) analyses. A major benefit of the two approaches mentioned above is that no resist patterning, etching or lift-off steps are required, thereby allowing for direct-write bottom-up patterning and for reducing the number of manufacturing steps. The underlying mechanisms enabling the selectivity were investigated using density functional theory (DFT) methods. Based on DFT results, it was suggested that the selectivity for In2O3:H deposition originates from the differences in the thermochemistry of the precursor adsorption on the OH-terminated and H-terminated silicon surfaces. In contrast, the selectivity for ZnO deposition originates from the differences in reaction kinetics of the precursor on OH-terminated and on H-terminated silicon surfaces. The area-selective ALD processes described above are based on thermal ALD recipes. However, some technologically relevant materials such as SiO2 and Si3N4 can be deposited at low temperatures only by plasma-assisted ALD. A novel approach that allows plasma processes to be implemented in area-selective ALD techniques was developed for the case of SiO2, by using a three-step (ABC-type) ALD cycle (Chapter 6). To this end, a suitable chemoselective inhibitor molecule, acetylacetone (Hacac), was selected. Hacac selectively adsorbs in step (A) on specific surfaces and inhibits the bis(diethylamino)silane (BDEAS) precursor chemisorption in the subsequent step (B). The ALD cycle is then completed in a third step (C) by an O2 plasma that removes the inhibitor and the precursor ligands. The nucleation of SiO2 using the ABC-type ALD process was investigated on 14 starting surfaces (e.g., direct deposition on SiO2 and GeO2 and nucleation delay on Al2O3 and HfO2 were observed) using in-situ spectroscopic ellipsometry. The selectivity of this area-selective ALD process was demonstrated on a patterned sample consisting of Al2O3 and GeO2, using spectroscopy methods. The inhibitor reactions were investigated using DFT calculations on Al2O3 and SiO2 starting surfaces. Based on these DFT results, it was made plausible that the selectivity originates from the difference in the thermochemistry of the Hacac adsorption: thermodynamically favorable on Al2O3, and unfavorable on SiO2. The ABC-type area-selective ALD process holds promise for realizing self-aligned fabrication schemes that are relevant for mitigating EPE issues. Furthermore, the ABC concept is fully compatible with plasma processing, thereby extending the portfolio of materials that can be selectively deposited. Finally, a novel route for the isotropic ALE of ZnO was introduced in this work, using the alternated dosing of Hacac and O2 plasma (Chapter 7). The process was investigated using in-situ spectroscopic ellipsometry on planar ZnO thin-films that were deposited on Si substrates. Using TEM inspection, the ALE process was demonstrated to enable isotropic layer-by-layer etching from 3D-topographies consisting of GaP nanowires that were coated with ZnO. High etch selectivity (80:1) over SiO2 and HfO2 and the possibility to extend the ALE process to other oxides (such as Al2O3) were also demonstrated. The etch selectivity of this process and the fact that it is a plasma-based approach may provide additional possibilities for achieving isotropic and controlled removal of oxides with high etch selectivity. In conclusion, area-selective ALD processes have been developed for several oxides, using thermal and plasma-assisted processing. The use of plasma radicals to achieve isotropic ALE has been demonstrated as well. The introduction of plasma process concepts in both area-selective ALD and isotropic ALE can enable novel processing options, thereby expanding the atomic layer processing toolbox. These results, together with the new insights into the surface chemistry reactions derived from DFT simulation, will contribute to mainstream industrial applications in advanced electronics, where single-digit nm process control is imperative. Other industries where dimensions are less critical can still benefit from the new selective atomic layer processing concepts. For example, in photovoltaics and displays, catalysis, energy-harvesting and optoelectronics, the manufacturing of superior-quality layers, the scaling and the reduction of manufacturing steps (i.e. cost) are essential.

Source of Information
https://research.tue.nl/en/publications/selective-atomic-layer-deposition-and-etching-of-oxides
University
Eindhoven University of Technology
(Eindhoven, Netherlands)
Read Thesis
LinkedIn
linkedin invite