Progress in Elastic Recoil Detection Analysis
- Author
- Kenichiro Mizohata
- Year
- 2013
- Abstract & Cover
- Source of Information
- FinALD40 exhibition material, http://www.aldcoe.fi/events/finald40.pdf
- University
- University of Helsinki, Department of Physics, Accelerator Laboratory (Helsinki, Finland)
- External Link
- Read Thesis
Elastic recoil detection analysis (ERDA) with heavy ion beams has evolved into a universal ion beam analysis (IBA) method for simultaneous analysis of almost all elements, with an essentially constant detection sensitivity. The method is based on the detection and identification of recoiling atoms that have been elastically scattered from a sample by an incident heavy ion beam. The principal characteristics of heavy-ion ERDA are outlined and illustrated using examples of data obtained with time of flight (TOF) and ∆E −E detector systems. The potential and limitations of the quantitative analysis were explored. For this purpose, a number of thin layer samples were measured using different projectiles and energies. Desorption of the surface materials during ERDA measurements was determined as a function of the probing ion fluence. As the differential cross-sections for scattering were enhanced for heavy projectiles, the beam dose to which the sample was exposed to during measurements was reduced by using heavy ion beams. However the higher cross-sections caused an increase of the desorption. An essential part of this study was dedicated to study those topics that limit the accuracy of the analysis in heavy ion TOF-ERDA, namely: uncertain stopping forces, quantification accuracy, ir radiation induced damage, depth resolution, and the role of multiple and plural scattering. Possible approaches to improve the sample characterisation efficiency and accuracy were stud ied by using a gas ionisation detector. This study concentrates on the noise reduction, detection characterisation, and analysis procedures. The focus was upon the effect of the large solid angle and position sensitivity on the irradiation induced damage, depth resolution, mass resolution, and elemental sensitivity. The reliability of the concentration distributions obtained with heavy ion ERDA was strongly af fected by the surface structure, surface roughness and multiple scattering. These effects were stud ied by comparing Monte Carlo simulations with the experimental results. The analysis procedure was developed to enable the characterisation of novel materials such as atomic layer deposited thin films and nanoparticles. Data handling and storage was improved to facilitate and speed up the analysis procedures.
