Precursor Chemistry for Atomic Layer Deposition
- Author
- Timo Hatanpää
- Year
- 2019
- Abstract & Cover
- Source of Information
- Timo Hatanpää
- University
- University of Helsinki (Helsinki, Finland)
- External Link
- Read Thesis
Precursors have an essential role in making thin films using chemical vapor phase methods, including atomic layer deposition. In these methods, precursor molecules are transported through the gas phase to the substrate surface where thin films of solid material are formed as a result of chemical reactions on the surface or in the vicinity of the surface. While a right choice of the precursor or precursor combination is needed to make the film growth possible, the choice will also, together with growth parameters, affect the structure, morphology, purity, electrical, optical, mechanical, and other properties of the forming films. New precursors are needed for new materials and to make better processes for known materials or to make known materials in a form that fulfills the requirements of a specific application. Essential general requirements for ALD precursors are volatility, thermal stability, and sufficient reactivity. Because of the different properties of the elements, finding precursors fulfilling all the above requirements is easy for some elements and extremely difficult for some others. The required properties are pursued by molecular design, i.e., by choosing or tailoring the right kind of ligands and compounds. In this work, precursors for making different materials of interest by ALD were invented, synthesized, and characterized. For magnesium a β-diketonate bis(2,2,6,6-tetramethylheptane-3,5-dionato)magnesium(II), Mg(thd)2, and its adducts were studied. It was found that the dimeric Mg2(thd)4 evaporated cleanly and was a suitable precursor in that sense. However, Mg2(thd)4 is lacking reactivity with water. Adducting led into monomeric compounds, but the volatility was not enhanced in perceptible degree. For strontium and barium, different cyclopentadienyl compounds were prepared and characterized. It was found that due to high thermal stability, volatility and reactivity strontocenes and barocenes with polysubstituted large and sterically demanding cyclopentadienyl ligands like Me5C5, iPr3C5H2 and especially tBu3C5H2 are most suitable precursors for the preparation of strontium and barium containing oxide films by ALD. Adduct forming ligands and donor-functionalized cyclopentadienyl ligands were found not to give any significant advantages considering the usage in ALD. Introduction of the cyclopentadienyl compounds of strontium and barium to ALD allowed the deposition of their oxides in sufficiently pure form for the first time. Still, the cyclopentadienyl compounds are the state of the art precursors for depositing strontium and barium containing oxide materials. For bismuth oxide and bismuth-containing oxide materials, different compounds were studied as possible precursors. It was found that a silylamide Bi(N(SiMe3)2)3 has volatility and thermal stability allowing its usage barely as a precursor for the deposition of ternary and quaternary bismuth-containing oxides while binary bismuth oxide deposition is difficult. The best precursor for depositing bismuth oxide was found to be Bi(OCMe2 iPr)3, an alkoxide with sufficiently bulky ligands. Alkoxides with smaller or larger ligands were found to be thermally less stable. Properties making Bi(OCMe2 iPr)3 an excellent precursor for making oxides are 1) reactivity with water, 2) low melting temperature making the precursor a liquid source, 3) large deposition temperature window that can be used, 4) ability to deposit pure films 5) higher growth rate (0.38 Å/cycle) than with any previous or later process achieved, and 6) sufficiently good long term stability at source temperature. Typically most of the silver compounds have low thermal stability. Adding an adduct forming ligand with strong π-acceptor properties was found essential for making silver compounds with good volatility and thermal stability. Among the compounds studied Ag(fod)(PEt3), a fluorinated β-diketonate adducted with triethylphosphine was found the most suitable precursor. This compound has exceptionally good thermal stability and sufficient volatility. Another synthesized and tested silver precursor was Ag(O2C tBu)(PEt3) – this compound was used in the first ALD process reported for silver. For ALD of different chalcogenides and pnictides alkylsilyl compounds of As, Sb, Bi, Se, and Te were synthesized and identified to be excellent precursors when used together with metal chlorides. Introduction of the alkylsilyl compounds opened up a way to easily deposit many chalcogenide materials that were earlier not successfully deposited by ALD. The alkylsilyl compounds are volatile and thermally stable compounds that have sufficiently high reactivity against metal halides and also some other metal compounds.
