Plasma assisted chemical deposition (CVD/ALD) and integration of Ti(Al)N and Ta(Al)N for sub-20 nm metal gate
- Author
- Fabien Piallat
- Year
- 2014
- Abstract & Cover
- University
- Université de Grenoble (Grenoble, France)
- External Link
- Read Thesis
After more than 40 years of aggressive downsizing of MOSFETs, geometric scaling is reaching fundamental limits. New materials and novel processes are necessary in order to extend device scaling to the last CMOS technology node of the International Technology Roadmap for Semiconductors (ITRS). Traditional gate stacks based on SiOxNy/poly-Si were replaced by high-κ/metal gate at the 45 nm logic technology (as gate leakage became too high to manage). For sub-20 nm CMOS generations, one of the most pressing challenge is to obtain good conformity of the deposited layers on the features of the devices. For example trenches deep by 10 nm and wide by 20 nm have to be filled by the high-κ/metal stack in the GateLast approach. Chemically deposited materials are necessary to achieve the requirements of the advanced nodes. Historically, thinning down the gate dielectric and increasing channel doping have been widely implemented to support the gate length shrink. However, the gate dielectric scaling has slowed down, and even with the adoption of high-κ/metal-gate it will be difficult to scale the EOT far below 1 nm. Moreover, integration of the materials has gained in interest since the amount of material at interface/surface became significant compared to the volume of the layers. Thanks to the characterisation tools available a fine analysis of the physico-chemical phenomena down to the atomic level is now at reach. Understanding of the correlations between the deposition process parameters and properties modifications of the stacks or devices are a necessity to successfully develop new materials. So the replacement of PVD TiN gate metal for new technology nodes became a necessity with the ever more demanding conformity constraint. Furthermore, PVD impact on the substrate, resulting in a degradation of the leakage current, confirms the advantages of chemical-based deposition methods and their “softness” toward the underlayer. Titanium and tantalum nitrides metals high affinity with oxygen allows to reach the low EOT (below 1 nm) required in the 22 nm and lower nodes, when paired with HfO2 high-κ dielectric.
