Novel material and device for ferroelectric memory: thin Hf1-xZrxO2 film and tri-states memory
- Author
- Min Hyuk Park
- Year
- 2014
- Abstract & Cover
- Source of Information
- Minsung Kim
- University
- Seoul National University (Seoul, Korea)
- Other notes
- Thesis kindly provided by Min Hyuk Park
- External Link
- Read Thesis
Ferroclectric random access memory (FeRAM) has been considered as one of the best candidates for universal memory. On the other hand. difficult scaling of the memory cell size has hindered the realization of high density FeRAM. Given that size scaling is inherently limited by the complicated crystal structure and difficult processing of ferroelectric materials. exploring new material or new device might be the best solution for that. In this dissertation. 116.260: thin films and tri-state memory is studied as new material and device for next-generation high-density ferroelectric memory. As the first step. the origin of the ferroelectricity in Hfl.,Zr,0• thin films is examined based on their crystallographic structure, micro-structures and resulting in-plane stress. Although it seems evident that the formation of the non-centronymmetric Pbc2, orthorhombic phase causes ferroelectricity in the doped and alloyed tif02-based films, the origin of such evolution has not yet been elucidated. From the electrical and physical characterization on HI,. „Zr„0 films with various film thickness (t,) and composition. ferroelectric onhorhombic phase is formed with the composition of —0.4 - 0.6 and 6 of < 25 nm. Even though these conditions are appropriate for the formation of tetragonal phase due to the size effect, the unexpected ferroelectric onhorhombic phase is formed. To elucidate the origin of the phenomenon, the film stress calculated from the change of substrate curvature and that of interplanar distance calculated from the change of diffraction peaks of X-ray diffraction spectra were analyzed, and it could be noticed that the unexpected orthorhombic phase is formed with the tensile strain of >1.5% and the grain size of < 25 nm. The large tensile strain is formed due to the huge tensile stress during the stage of island coalescence of Volmer-Weber type growth. In addition to that, the 1110,240.502 (HZO) films on Pt bottom electrode (BE) were deposited with tetragonal phase with (I I I)-prettied orientation. and they hardly showed ferroelectric behavior. On the other hand, the in-plane strain of 1120 flints on Pt BE was almost equivalent with that on TiN BE, which is large enough for the formation of orthorhombic phase. However. the stress along a-. b-, and c-axis am almost equivalent for the case of ( 1 I I )- (oriented films, so it does not meet the condition of asymmetric stress for orthorhombic phase formation. In addition to that, the effects of annealing temperature (T...1) and film k on the crystal structure and ferroelecuic properties of HZO films were examined. The HZO films consist of tetragonal, orthorhombic, and monoclinic phases. The orthorhombic phase content, which is responsible for the fcrroelectricity in this material, is almost independent of but decreases with increasing k. In contrast, increasing T.„, and k monotonically increases (decreases) the amount of monoclinic (tetragonal) phase, which coincides with the variations in the dielectric constant. The remanant polarization was determined by the content of orthorhombic phase as well as the spatial distribution of other phases. As the next step, the effects of forming gas annealing (FGA) on the ferroelectric properties of HZO films were examined. Although the H. incorporation during FGA degrades the fennelectric properties of HZO films. the degree of degradation was much Iowa compared with other ferroelectrics. such as Pb(Zai)01. Pt worked as a catalyst for II-incorporation. and maximum 2P, loss of -40% occurred. However. the insertion of a -20-nm-thick TIN layer between Pt and 120 decreased the degradation to -12h. HZ0 is more resistant to degradation by EGA compared with the conventional ferroelectrics. which is a highly promising result for next-generation ferroelecuic memory. In addition to that, the effect of the top electrode (TE) on the ferroelectric properties and switching endurance of thin HZO films was examined. The liNi4ZON capacitor can endure up to 10° times the electric cycling, which is promising for the next-generation memory. RuO: TE was reduced during annealing due to the reactive TiN BE, resulting in the degradation of the ferroclectric properties and endurance. In addition, the endurance of the TiN/1-1ZOrTiN capacitors was optimized by changing the film thickness and the post-annealing temperature. Finally, this thesis presents a feasible structure and actual operation of a tri-state memory function for high density FORAM using stacked ferroelectric Pb(Zr.Ti)Odinsulating Al201semiconducting ZnO layers with Pt top and BEs. The complicated electrical responses of the stacked structure to external stimuli were well understood based on the separated trapping of the compensating charges at the Pb(Zr.71)03/Al203 and Al20,/ZnO interfaces and the discrete dissipation of the trapped charges during polarization switching in one direction. This unique function of the structure induced three discrete charge states that can be used to increase the memory density by 50% compared to conventional FeRAM at a given cell size. It is believed that this thesis presents new pathways for the next-generation ferroelectric memory by exploring the new material system of HE.2.r,02 films and by suggesting the new structure and operation of ferroelectric capacitor with novel ferroelectric-insulator-semiconductor heterojunction. Even though the ferroelectric memory is still far from the adoption as a universal memory., the results in this thesis could shed light on this field by suggesting new pathways different from the conventional approach.
