Non-metal Alkylsilyl Compounds as Precursors in Atomic Layer Deposition of Chalcogenides and Pnictides
- Author
- Tiina Sarnet
- Year
- 2015
- Abstract & Cover
- Source of Information
- Jani Hämäläinen
- University
- University of Helsinki, Department of Chemistry (Helsinki, Finland)
- External Link
- Read Thesis
Materials are crucial to the technological advances of society. The never ending need for data storage and new energy sources pushes research towards clear goals. Perhaps some of today’s solutions can in the future be replaced or augmented with phase change memories and thermo electric materials. Phase change materials store data in their amorphous and crystalline phases that have great differences in their electrical and optical properties. Thermoelectric materials can utilize waste heat and produce electricity from temperature differences. They can also be utilized in temperature control as they can be used to create a temperature difference by using electricity. Shrinking device sizes and increasing device complexity require that deposition methods such as atomic layer deposition (ALD) are used. ALD is based on sequential, saturative surface reactions. Precursors are brought to the surface one at a time, separated by purges. Because of the saturative reactions, each ALD cycle deposits a constant amount of material up to a monolayer, making film thickness control very simple. ALD of chalcogenides has focused mainly on sulfides, and the chemistries for selenide and tel luride depositions have been limited. Pnictides have a similar situation. The ALD chemistries for arsenides include only a few combinations of precursors, and antimonides are barely demon strated. This is why a new group of precursors was needed. The alkylsilyl non-metal precursors react very efficiently with metal halides in a dehalosilylation reaction. These types of reactions have now been utilized in both chalcogenide and pnictide thin film growth. In this thesis, several chalcogenide and pnictide ALD processes were studied in detail by uti lizing the appropriate alkylsilyl non-metal precursors. In general, typical ALD characteristics were found. Growth rates saturated with respect to precursor pulse lengths; film thicknesses increased linearly with the number of deposition cycles; and the films were stoichiometric with low impurity contents. Application wise, the ALD chalcogenide and pnictide films had the re quired properties. The phase of the phase change materials could be repeatably and quickly changed, and the thermoelectric films showed a proper response to a temperature gradient.
