Nanomaterial design via ALD: new methods and applications in catalysis
- Author
- Joseph Singh
- Year
- 2018
- Abstract & Cover
- Source of Information
- Stanford Libraries
- University
- Stanford University (Stanford, USA)
- External Link
- Read Thesis
Producing chemicals and liquid fuels from renewable carbon monoxide and hydrogen (syngas) is a key route towards an environmentally sustainable economy. Alcohols beyond methanol are key targets for fuel and chemical production; however despite almost a century of research, there are no industrially appropriate catalysts for the direct formation of these compounds. New methods are needed to synthesize catalysts for higher alcohol production from syngas. Atomic layer deposition (ALD) is one such synthetic strategy. In this thesis, a new method for ALD nanoparticle synthesis was developed that can be used to prepare catalysts. Using oxygen gas as the co-reactant, area-selective ALD of metal oxides by metalorganic precursors that typically reactive strong oxidants to proceed was achieved selectively on noble metal surfaces by exploiting the catalytic dissociation of oxygen molecules at the metal surface. The process was demonstrated for selective deposition of both iron oxide and nickel oxide on platinum and iridium substrates, which acted as the catalytic surface for oxygen dissociation. The area-selective ALD approach was evaluated on planar and patterned substrates and used to prepare Pt/Fe2O3 core/shell nanoparticles. To explore metal alloy catalysts for syngas conversion, CoZn and PtCo catalysts were synthesized through a combination of traditional wet synthesis and ALD. During synthesis, the number ALD cycles was tuned to optimize catalytic performance with precise control. These catalysts had greatly improved selectivity for the alcohols during syngas conversion. To understand the improved selectivity and behavior of these catalysts, in-situ characterization cells based on infrared spectroscopy and x-ray diffraction were developed and applied to study the catalysts during operation. By investigating the surface chemistry of PtCo catalysts, it was discovered that the presence of Pt modifies CO binding sites during CO hydrogenation. Pt increased the amount of on top CO on Co which led to more undissociated CO, favoring alcohol formation. By performing in-situ measurements of CoZn at high pressure, it was discovered that the presence of Zn leads to Co2C formation during catalyst operation. The resulting Co2C was found to be critical in alcohol formation on these catalysts. Beyond CO, CO2 is an emerging feedstock for renewable chemical production. New CoGa catalysts were synthesized for CO2 hydrogenation. These catalysts achieved 95 % selectivity towards methanol and dimethyl ether (excluding CO) during reaction of CO2 and H2 at 30 bar pressure and 230 °C temperature. The Co:Ga ratio was found to play a critical role in the selectivity, with increasing Co content favoring methane production and increasing Ga content favoring dimethyl ether production. The work in this thesis has demonstrated the promise of ALD for heterogeneous catalyst synthesis and developed new approaches for ALD of nanomaterials. The studies on CO and CO2 hydrogenation have led to new understanding of the structure and mechanism of alcohol synthesis catalysts and may ultimately aid in the creation of high performance catalysts.
