Multiscale simulation of metallic copper and copper oxide atomic layer deposition from Cu Beta-diketonates

Author
X. Hu
Year
2018
Abstract & Cover

Copper (Cu) interconnects have been widely used to replace aluminum in ultra-large-scale integration due to low resistivity and superior resistance to electromigration. Current processes for the fabrication of interconnects require thin Cu seed layers before the subsequent Cu filling by electrochemical deposition (ECD). It is crucial that these seed layers are coated conformally and smoothly in vias and trenches, ensuring that the ECD Cu films are free of voids. With the continuous scaling down of device dimensions, atomic layer deposition (ALD) has been considered as the most promising technology for making the Cu seed layers, because of its excellent conformality and precise thickness control. This dissertation is dedicated to the multiscale simulation of Cu ALD using the Cu beta diketonate precursors ( nBu3P)2Cu(acac) and Cu(acac)2. Different co-reactants (H, H2, H2O, O3 and wet O2) were investigated with respect to their application for the ALD of metallic Cu and Cu oxides. While Cu beta-diketonates have been widely applied in ALD, the mechanistic details of the surface reactions are still largely unknown. Ab initio calculations were performed to obtain the input data for reactive molecular dynamics (RMD) simulations and thermodynamic modeling, which were realized at the molecular-scale and macroscale, respectively. In the gas-phase, the thermodynamic analysis predicts that the (nBu3P)2Cu(acac) precursor will dissociate into ( nBu3P)Cu(acac) and nBu3P even at low temperatures (300–400 K). The further dissociation of (nBu3P)Cu(acac) requires much higher temperatures (> 575 K), which prevents the undesired disproportionation reaction. On the other hand, the gas-phase decomposition of the Cu(acac)2 precursor is unfavorable during ALD. The adsorption and decomposition of Cu precursors were studied on the Ta(110), Cu(110), Ru(001), Cu2O(111), SiO2(001), and TaN(111) substrates. A simplified precursor model (Me3P)Cu(acac) was applied to save computational costs. The metallic substrates Ta, Cu, and Ru, exhibit a much higher reactivity towards Cu precursors as compared to the metal oxide (Cu2O and SiO2) and the metal nitride (TaN) substrates. It is evident that electrons are transferred from the metallic surface to the adsorbate, leading to the reduction of the Cu center atom. RMD simulations were performed to understand the surface reactions between the Cu precursor and different co-reactants. Water reacts with adsorbed Cu(acac) through a ligand exchange reaction, producing gaseous H(acac) and surface OH species. In the presence of O2, the released H(acac) molecules can be further oxidized into COx and H2O, which is under kinetic control. Molecular hydrogen is found to be nonreactive towards Cu(acac)2; whereas atomic H can efficiently remove the surface acac-ligands, with CxHy and HxO as the reaction products. A combustion-like reaction with the by-products COx and HxOy is observed in the reaction between Cu(acac)2 and O3. By comparison with the reaction rate and the carbon removal ratio under different conditions, it can be concluded that the reactivity of co-reactants towards Cu(acac)2 follows the order H > O3 > H2O > H2.

Source of Information
Fraunhofer Publica
University
Fraunhofer ENAS, TU Chemnitz
(Chemnitz, Germany)
External Link
Read Thesis
LinkedIn
linkedin invite