Low-Power Nanowire Circuits and Transistors

Author
Anil Dey
Year
2013
Abstract & Cover

This thesis explores several novel material systems and innovative de vice concepts enabled by nanowire technology. State-of-the-art fab rication techniques such as electron beam lithography and atomic layer deposition are utilized to achieve high control and quality in the device fabrication. The devices in this thesis are based on two main types of design geometries, lateral and vertical, each of which have strengths and weaknesses. The  rst part of the thesis describes the goals of future metal oxide semiconductor  eld-e ect transistors (MOSFETs) and discusses the ultimate scalability surrounding exper imental results for 15-nm-diameter InAs nanowires and how they com pare to other state-of-the-art transistors. The extracted on-resistance (Ron = 250 Ω•µm) and drive currents (Ion = 1250 µA/µm) are compa rable to state-of-the-art high-electron-mobility transistors (HEMTs) from MIT and quantum-well  eld-e ect transistors from Intel. The outstanding performance is mainly attributed to the reduced access resistance achieved through an n +-i-n + doping pro le. The extracted mobilities also agree well with state-of-the-art and theoretical predictions for extremely scaled devices. The second part of the thesis discusses how nanowires may be employed to enable III-V complementary metal oxide semiconductor (CMOS) digital logic. Nanowires enable the formation of both n-type semiconductors and p-type semiconductors, which are a requirement for CMOS, in a single nanowire and allow for integration on a Si platform. III-V MOSFETs are frequently employed for analog ap plications, but there is a disconnect regarding p-type devices, which are also required for digital logic. The individual segments of the nanowire are evaluated as well as the entire nanowire in an inverter con guration. This thesis then presents a strategy for matching the drive currents n- and p-type MOSFETs. The  nal part of the thesis deals with a family of devices that op erate according to principles fundamentally di erent from those of a traditional MOSFET, namely tunnel FETs (TFETs). There is a de mand for steep-slope devices such as TFETs to enable supply-voltage scaling to reduce the power dissipation. Although devices have demon strated are much improved as compared to their axial counterparts when nor malized to the largest cross-sectional area of the nanowire, assuming a vertical device geometry, illustrating the advantage of a core shell architecture. The dimensions of the InAs shells are below 15-nm and display clear quantization e ects revealed in low-temperature electri cal characterization

Source of Information
Jonas Sundqvist
University
Lund University
(Lund, Sweden)
External Link
Read Thesis
LinkedIn
linkedin invite