Evaluating dielectric thin film for next-generation DRAM capacitor using Al-doped TiO2

Author
Woojin Jeon
Year
2015
Abstract & Cover

The optimized metal-insulator-metal (MIM) capacitor consisted with Al-doped TiO2 (ATO) and Ruth as dielectric and electrode, respectively. for next-generation dynamic random access memory (DRAM) device was investigated. First, the role of Al dopant in tutile-phased TiO2 films in the evaluation of the mechanism of leakage current reduction in ATO was studied in detail. The leakage current of the ATO film was strongly affected by the Al concentration at the interface between the ATO film and the Ruth electrode. The conduction band offset of the interface increased with the increase in the Al dopant concentration in the rutile 1102. which reduced the leakage current in the voltage region pertinent to the DRAM application. However. the Al doping in the anatase TiO2 did not notably increase the conduction band offset even with a higher Al concentration. The detailed analyses of the leakage conduction mechanism based on the quantum mechanical transfer-matrix method showed that Schottky emission and Fowler-Nordheim tunneling was the dominant leakage conduction mechanism in the lower and higher-voltage regions. respectively. The chemical analyses using X-ray photoelectron spectroscopy corroborated the electrical test results. Next, the effects of Pt and Ruth top electrodes on the electrical propenies of capacitors with ATO films were examined. The interface between top electrode and ATO was damaged during the sputtering process of the top electrode, resulting in the decrease in the dielectric constant. Post-metallization annealing at 400 "C was performed to mitigate the sputtering damage. During the post-metallization annealing. the ATO layer near the RuOgATO interface was welkerystallind because of the structural compatibility between Rut: and nude Tith while the ATO layer near the PdATO interface still exhibited an amorphouslike structure despite the same thickness of the duo films, therefore, the capacitors with Ruth top electrodes show higher capacitance compared to the capacitors with Pt top electrodes. Eventually., an extremely low equivalent oxide thickness of 0.17 um with low enough keine current density (<I a 104 Mani at 0.8 V) and physical thickness of 8.7 nm for the next-generation dynamic random access memory was achieved from AID films with Ruth top electrodes. Finally, the chemistry of Tith atomic layer deposition (ALD) on Ru or Ruth. which is one of the most promising electrode materials in DRAM capacitors, was studied in detail. A series of the Ru-related layers with compositions ranging from Ru to Ruth via Ruth fx: -1.12) was used as a bottom electrode for the ALD growth of TiO2 films. It was found that the growth per cycle of DO: at the initial growth stage was drastically increased on Ruth 1RuOgRu mixture) compared to Ru and Ruth. This is attributed to the drastic increase in the chemical activity of oxygen in the mixture film of Ruthltu. The catalytic decomposition of RuOr with the help of Ru in the film played the crucial role for the increase in the active oxygen. While Ruth and Ru mostly retained their structures during the AID of Tith or chemical etching using Os gas, the Ruth film, which was composed of 56% Ruth and 44% Ru. drastically changed its phase composition dud.. ph. ALD of Tith at 250 ° C and became almost Ru. Other chemical effects depending on the chemical composition and phase structure were also examined in detail.

Source of Information
Seoul National University
University
Seoul National University
(Seoul, Korea)
External Link
Read Thesis
LinkedIn
linkedin invite