Development of Conducting Zn-based Wide Bandgap Materials by Atomic Layer Deposition

Author
Soumyadeep Sinha
Year
2016
Abstract & Cover

This thesis is focused on the development of conducting Zn-based wide bandgap binary compounds (oxide, nitride and sulphide) which can potentially be applied as transparent conducting materials in various fields of electronic and opto-electronic applications. Atomic Layer Deposition (ALD) technique is adopted to deposit the materials owing to its several advantages over other deposition techniques. The complete work represents a detailed study of the materials’ growth using in-situ as well as ex-situ measurement techniques and other exsitu characterizations to study the various properties of the materials. The work is initiated with the development of zinc oxide (ZnO), a very common oxide based transparent conductor, by ALD and an extensive study of its electrical properties. Here the work mainly concentrates on the detailed investigation of ALD grown ZnO with tunable conductivity. ZnO films are deposited on SiO2/Si and glass substrates by ALD using diethylzinc (DEZ) as the metal precursor and water (H2O) as the oxidant over a temperature range of 75°C to 225°C. The self-limiting behavior of ALD and the linear growth of the deposited films are demonstrated by in-situ quartz crystal microbalance (QCM) study. The as deposited crystalline ZnO films are found to be c-axis preferentially oriented with dense microstructures, homogeneous grain sizes and low surface roughness. The minimum resistivity of the order of 10-3 Ω-cm with carrier density ca. 1021 cm-3 is achieved for the ALD grown ZnO thin films. An increased resistivity is found on co-dosing of O3 with H2O. This offers a wide range of tunability in resistivity associated with high transparency thus making the material a potential candidate for electronic and optoelectronic device applications. Incorporation of Al as a standard dopant in ZnO thin films shows a comparable resistivity with the existing literature without any compromise with its transparency. The developed AZO films can be applied as an electron transport layer in CZTS thin film solar cells. The work is carried further to the development of zinc nitride by ALD using DEZ and ammonia (NH3) for the first time. The anion vacancy dependent conductivity and high transparency opens a new path for its application as a new transparent conducting material. Density Functional Theory (DFT) explains the atomistic reaction pathway of the ALD reaction mechanism. The ALD reaction mechanism is further validated by in-situ Fourier transformed Infrared (FTIR) spectroscopy study. The as deposited films are found to be polycrystalline with preferential orientation in the {321} direction. The as-grown zinc nitride films show n-type conductivity with carrier concentration in the order of 1018 cm−3. The Hall mobility and resistivity of the material is found to be ca. 4–6 cm2 V−1 s−1 and ca. 10−3 Ω cm respectively. The performance of the material is further investigated as channel layer in thin film transistor (TFT) devices. In the final lap of the work, zinc sulphide, a yet another Zn-based binary compound, is chosen as the host material for the development of new sulphide based transparent conducting materials. Al3+ and Cu+ are opted as the dopants to obtain the conductivity of ZnS thin films, as ZnS by itself is non-conducting in nature due to its highly stoichiometric nature without any anionic or cationic vacancy as found in other Zn-based materials. It is mentionworthy here that both Al doped ZnS and Cu doped ZnS is developed by ALD for the very first time by this work. For Al doping in ZnS by ALD, first aluminumsulfide deposition chemistry is developed by ALD using sequential exposures of trimethylaluminum (TMA) and hydrogen sulfide (H2S) in the temperature ranging from 100° – 200°C. A detailed study of the growth is done. It is found that the growth rate per ALD cycle is highly dependent on the purging time between the two precursors. Increased purge time results in higher growth rate. Surface limited chemistry during each ALD half cycle is studied by in-situ Fourier transformed infrared vibration spectroscopy thus understanding the reaction chemistry better. Using the aluminium sulfide and ZnS deposition chemistry, the incorporation of Al in ZnS is attempted at different substrate temperatures with different Al doping concentrations. The films are well crystalline with around 60-70% transparency. The resistivity of the asdeposited films is found to be of the order of ca. 104 – 105 Ω-cm. This value though relatively high with respect to the requirement for the application as transparent conducting materials, but is considerably lower than the parent ZnS. Thus the work moves toward the second approach, where Cu is incorporated in ZnS by the combination of individual ALD of ZnS and CuxS at 150°C. CuxS thin films are deposited using Cu(hfac)2 and H2S as the two ALD precursors at 150°C. The minimum resistivity of the order of ca. 10-3 Ω-cm with a high carrier concentration (ca. 1021 cm-3) is achieved for the Cu doped ZnS thin films by ALD. The film with the highest conductivity also shows > 70 % transparency for wavelengths > 430 nm and ~ 85 % transparency at 500 nm. 

Source of Information
Dr. Soumyadeep Sinha
University
IIT Bombay
(Mumbai, India )
Other notes
Kindly supplied by Dr. Soumyadeep Sinha
Read Thesis
LinkedIn
linkedin invite