Combining Focused Ion Beam Patterning and Atomic Layer Deposition for Nanofabrication
- Author
- Zhongmei Han
- Year
- 2018
- Abstract & Cover
- Source of Information
- Jani Hämäläinen
- University
- University of Helsinki, Department of Chemistry (Helsinki, Finland)
- External Link
- Read Thesis
For nanofabrication of silicon based structures, focused ion beam (FIB) milling is a topdown approach mainly used for prototyping sub-micron devices, while atomic layer deposition (ALD) is a bottom-up approach for depositing functional thin films with excellent conformality and a nanometer level accuracy in controlling film thicknesses. Combining the strengths of FIB milling with ALD provides new opportunities for making 3D nanostructures. In FIB milled silicon, the gallium implanted surface suffers from segregation and roughening upon heating, which makes the thermal stability of the as-milled substrate a concern for the following ALD processes which are typically performed at temperatures of 150 and higher. This study aimed to explore methods for improving the thermal stability of FIB milled silicon structures for the following ALD processes. The other aim was to fabricate nanostructures by alternately using FIB milling and ALD approaches on silicon and oxide thin film materials. The experiments were started on the reduction of gallium implantation during FIB milling of silicon substrates using different incident angles. Oblique incidence of the ion beam was found an effective method for improving the thermal stability of the FIB milled silicon surfaces by decreasing their gallium content. The improved thermal stability allowed to apply ALD Al2O3 on the FIB milled surfaces to make nanotrenches. Wet etching in KOH/H2O2 was found as a second method for improving the thermal stability by removing the gallium implanted silicon layer. ALD Al2O3 thin films can be applied as milling masks to limit amorphization of silicon upon FIB milling. With the aid of KOH/H2O2 etching, nanopore arrays, nanotrenches and nanochannels were fabricated. ALD grown Al2O3/Ta2O5/Al2O3 multilayers were FIB milled and wet etched to form both 2D and 3D hard masks. The fabricated 2D masks were used for making metal structures which are applicable for electrical connections. Thin film resistors were also fabricated using this 2D mask system. In conclusion, this study illustrates that combining FIB patterning and ALD is feasible for 3D nanofabrication when the stability of FIB milled surfaces is considered and improved. Keywords: atomic layer deposition, focused ion beam, nanofabrication, wet etching, gallium removal, hard mask, multilayers, thin film resistors, 3D
