Atomic Layer Deposited 3D Nanostructured Materials for Efficient Energy Storage
- Author
- Arpan Dhara
- Year
- 2019
- Abstract & Cover
- Source of Information
- Arpan Dhara
- University
- IIT Bombay (Mumbai, India )
- Read Thesis
The rapid advancement in the field of nanotechnology in the past several years has promised great potential for controlling materials at the nanoscale and stimulated vast opportunities to architect materials with desirable properties. This evolution has also contributed significantly to the development in the area of energy storage, which is a crucial technology in the present time. Electrode architecture always plays an important role in the domain of energy storage. In specific, engineering at nanoscale offers exclusive properties resulting in an improvement in the performance of electrodes and electrolytes in different energy storage technologies. Accordingly, significant efforts have been put forward in recent years to accomplish the present demands of energy storage using these advanced nanostructured materials. Various nanostructured materials with larger surface area and low bulk volume are presently being studied to improve the energy and power densities together for next-generation storage devices. The main objective of this thesis is to develop three-dimensional (3D) nanostructured electrodes with superior energy density and power density for electrochemical energy storage. Controlling the thickness of the active material in a few nanometers ensures the short diffusion length and full utilization of the active material. To get the nano level control, the ALD technique is used for active material deposition. Highly conducting templates like CNTs, graphenes and metal nanostructures are utilized to anchor the active material ensuring the effective electron transportation. Three-dimensional electrodes represent a unique way to improve the storage density and rate capability without the complex process of material development. This thesis presents the synthesis of 3D hybrid nanostructured electrodes with superior energy density and power density for electrochemical energy storage using template assisted methods. Carbon nanotubes (CNT) and Cu-NWs are used as template layer because of their high surface area and electrical conductivity. The active material is being deposited on these template layers by atomic layer deposition (ALD) process because of its extreme conformal and sub-nanometer thickness control.
Due to its high theoretical capacity, energy density and excellent reversibility with Li/Li+, molybdenum oxides are one of the vastly studied electrode material in lithium-ion batteries. However, like most of the oxides, it also suffers from poor cyclic stability because of their low electrical conductivity. In 3D core-shell structure prepared by ALD coating provide superiority in nanoscale decoration because of its extreme conformality and precise thickness control on high aspect ratio surfaces. The first part of this thesis focuses on the fabrication and electrochemical activities of 3D CNT/MoOx electrodes. These electrodes exhibit much higher areal and overall cell capacity than its planer 2D counterpart. An optimal thickness of MoOx on CNT is also found out in order to attain the most stable cyclic performance of this nanostructure. A stable reversible areal capacity of 645 μAh cm-2 with a specific capacity of 915 mAh g-1 is achieved from optimized MoOx/CNT assembly.
The second part of the thesis focuses on increasing the conductivity of the MoOx layer by N-incorporation for better electrochemical performance. It is well studied that the transition metal oxynitrides have better conductivity than their pure oxide phase. This particular work highlighted three important factors, (i) synthesis, (ii) electron transportation and (iii) electrochemical performances of N-incorporated MoOx films. It is found that N-atoms are homogeneously distributed throughout the films at the deposition temperature, no post-annealing is required for diffusion. The conductivity of those films increases with increasing nitrogen concentration. The electrochemical study reveals the superior performance of N-incorporated films against Li/Li+ than that of the pristine materials. The highest discharge capacity of 1287 mAh g-1 was achieved in the first cycle at a current rate of 0.1 A g-1 and a stable capacity of 974 mAh g-1 and 610 mAh g-1 achieved when discharged at 0.1 and 2 A g-1 from the core-shell 3D CNT/MoOx:N electrodes.
In the final part, Cu-nw scaffold is used as template layer by replacing CNTs. The high abundance, low-cost and high electronic conductivity make the choice simpler to use Cu as an affordable scaffold layer. Cu/ MoOx electrode showed a stable capacity of 993 mAh g-1 at the rate of 0.1 A g-1 and retained 45% of its initial capacity with 40 times higher current rate. This kind of state-of-the-art fabrication method helps to deposit more amount of active material with less Li+ diffusion length and ease the electron/ion transportation during the charge-discharge process
