Atomic layer deposition on graphene: towards graphene device integration

Author
R.H.J. Vervuurt
Year
2017
Abstract & Cover

Atomic Layer Deposition of Graphene: Towards Graphene Device Integration


Graphene is a two-dimensional material that has attracted considerable scientific interest over the past few years, due to its exceptional mechanical, electrical and optical properties, which make it a promising candidate for post-silicon optical and electronic devices. For device integration the ability to deposit thin high-κ dielectrics and metals on graphene is essential. To deposit these layers atomic layer deposition (ALD) is the method of choice, due to its ability to deposit uniform high-quality materials with sub-monolayer thickness control. ALD on pristine graphene, however, is a challenge due to the lack of out-of-plane bonds. ALD growth of dielectrics and metals on pristine graphene therefore only occurs on defect sites or grain boundaries where dangling bonds or functional groups are present.


To overcome these nucleation issues several different surface preparation techniques to initialize ALD on graphene have been explored over the years and are critically reviewed in chapter 2. An overview of the different functionalization methods to achieve uniform ALD growth is presented together with their advantages and disadvantages. Among the different functionalization methods, plasma functionalization shows promise due to its processing ease, compatibility with silicon technology and limited amount of extra processing steps required. However, when O2 or N2 plasmas are used for functionalization, the sp2 backbone of graphene is damaged, deteriorating its electrical properties, such as the charge carrier mobility.
In chapter 3 a new method to deposit ultrathin, uniform Al2O3 layers on graphene using reversible H2 plasma functionalization followed by ALD is introduced. It is shown that H2 plasma functionalization of graphene leads to uniform ALD of closed Al2O3 films down to 8 nm in thickness. Hall measurements and Raman spectroscopy reveal that the hydrogen plasma functionalization is reversible upon Al2O3 ALD and does not deteriorate the graphene charge carrier mobility. Density functional theory DFT analysis of the possible reaction pathways for Al(CH)3 precursor adsorption on hydrogenated graphene predict a H2 and CH4 release mechanism that cleans off the hydrogen functionalities from the graphene surface, which explains the observed reversibility of the hydrogen plasma functionalization of graphene upon Al2O3 ALD. The use of H2 and O2 plasma functionalization to initialize ALD growth on graphene is also exploited for the fabrication of metal-graphene contacts. First we developed an area-selective ALD (AS-ALD) process for the selective deposition of Pt using photosensitive polyimide, in chapter 4. The polyimide can be patterned using photolithography and acts as a blocking layer, preventing the adsorption of the Pt ALD precursor. The high temperature stability of the polyimide made it ideal for the selective deposition of Pt at 300 °C, yielding an improved uniformity of the Pt deposits and superior definition of the Pt patterns compared to the more commonly used poly(methyl-methacrylate) resist.


The combination of polyimide to block ALD growth and plasma treatments to initiate ALD growth on graphene, allowed for the fabrication of high-quality Pt-graphene contacts, shown in chapter 5. Improved contact resistances were measured compared to standard evaporated Pt-graphene contacts. Furthermore, H2 plasma functionalization resulted in better contact resistances than O2 plasma functionalization. This was explained by a different edge termination of the graphene after a H2 or O2 plasma (C-H vs. C=O).


In conclusion, in this work it is demonstrated that a H2 plasma functionalization is an excellent way to enable direct ALD growth on graphene. Most of this thesis work has been or will be published in peer-review scientific journals, and provides new opportunities for the integration of graphene in devices for various applications.
 

Source of Information
https://research.tue.nl/en/publications/atomic-layer-deposition-on-graphene-towards-graphene-device-inter
University
Eindhoven University of Technology
(Eindhoven, Netherlands)
External Link
Read Thesis
LinkedIn
linkedin invite