Atomic layer deposition of strontium titanate: from material control to nanoscale devices

Author
Valentino Longo
Year
2014
Abstract & Cover

Atomic Layer Deposition of Strontium Titanate from material control to nanoscale devices With the scaling of advanced microelectronics approaching its physical limits new technological solutions are needed. In particular innovative 3D-structures are being investigated with an increasing number of functional layers containing novel and more complex materials. To fulfill the strict requirements for future nanoscale devices the properties of the materials to be employed are of crucial importance. Hence, the thickness, the composition and the interfaces of the deposited thin films need to be carefully tailored also when deposited in the 3D-structures. In addition, the morphological and microstructural changes in the materials induced during the entire process flowchart need to be taken into account and controlled. To meet these challenging requirements atomic layer deposition (ALD) is increasingly used as an ultrathin-film deposition technique. It enables superior thickness control and film conformality and also enables the control of the film composition of multicomponent compounds. A technologically relevant example of a material for which the properties can be tailored by ALD and the subsequent processing steps is strontium titanate (SrTiO3, STO). STO represents a class of multicomponent oxides with their dielectric properties and morphology strongly depending on the cation stoichiometry and on the thermal treatments they undergo. Due to their high permittivity STO thin films find their main application as the ultrahigh-k dielectric layer in metal-insulator-metal (MIM)- based memory devices. Also they show other interesting properties for application in, for instance, resistive switching valence change memories. In all of these applications the tailoring of the material properties is vital to achieve the targeted performances. This thesis work focuses on the control of the material properties of ALD STO thin films. The plasma-assisted ALD processes for TiO2 and SrO were developed using cyclopentadienyl-based precursors and an O2 plasma. By combining the ALD cycles of the two binary oxides with different ratios it was possible to accurately control the stoichiometry of the films over a wide range of [Sr]/([Sr]+[Ti]) ratios. By using Rutherford backscattering spectrometry (RBS) and X-ray diffraction (XRD) data a method was established to determine stoichiometry and crystallinity of the films by means of spectroscopic ellipsometry (SE). The as-deposited STO films are amorphous, and rapid thermal annealing was used to achieve crystallization into the desired ultrahigh-k perovskite structure. Transmission electron microscopy (TEM) was used to study the influence of the film stoichiometry and of the thermal budget applied on the crystallization behavior of STO films deposited on Si3N4 and Al2O3. It was shown that the lattice planes of the STO crystallites bent due to film densification upon the amorphous-crystalline transformation. Furthermore, it was found that film composition and annealing conditions strongly influenced the nucleation probability and the final morphology of the crystalline films, with a smaller grain size and reduced crack formation at the grain boundaries for Sr-rich films. In the aforementioned applications STO is used in metal MIM structures. Therefore Pt/STO/Pt stacks were fabricated by ALD with the aim of studying the growth, the crystallization behavior and the interplay of the processing steps involved in the fabrication of the structures. Results evidenced that not only crystalline STO is obtained after the RTA step but that the Pt bottom electrode also undergoes a re-crystallization process upon annealing which results in an increased Pt texture. Structural analysis showed that the morphology of the STO crystals was comparable to those obtained on Si3N4 and Al2O3 substrates. The STO thin films were also studied as functional layers in electronic device structures. First, Pt/STO/Pt structures were investigated to determine the dielectric properties of the STO films. Ultrahigh-k STO thin films were obtained with their permittivity depending on the film composition. While higher capacitance values were achieved for the stoichiometric STO films, Sr-rich films showed the lowest leakage current values. This was ascribed not only to the higher band gap values but also to the more compact morphology of Sr-rich films compared to near-stoichiometric STO films. Furthermore, the influence of the STO film composition on the resistive switching behavior of Pt/STO/TiN MIM micro- and nano-crossbar structures was addressed. Results showed that the filamentary-type resistive switching behavior was predominantly governed by the morphology of the STO film after the RTA step, which is controlled by the composition of the film. Therefore, the lateral size of the crossbars structure employed in this study showed to be of critical importance on the working parameters of the device. In conclusion, this research work provides deeper insight into the tailoring of STO thin films prepared by ALD from the level of material properties up to the device level. It serves as a valuable example on how to finely tune multi-component oxides employed in the fabrication of nanoscale devices by accurate control and optimization of the processing conditions. 

Source of Information
Harm Knoops
University
Eindhoven University of Technology
(Eindhoven, Netherlands)
External Link
Read Thesis
LinkedIn
linkedin invite