Atomic layer deposition of ruthenium films: properties and surface reactions
- Author
- Noémi Leick
- Year
- 2014
- Abstract & Cover
- Source of Information
- Harm Knoops
- University
- Eindhoven University of Technology (Eindhoven, Netherlands)
- External Link
- Read Thesis
Atomic Layer Deposition of Ruthenium Films Properties and Surface Reactions Over the last decade, the downscaling of electronic devices by the semiconductor industry has been the driving force to explore the deposition of nanometer- sized thin films and 3D-structures. For long, the microelectronics industrial roadmap has been dominated by Si-based materials, such as SiO2 and SiNx dielectrics, and conductors such as doped polycrystalline silicon and TiN, which are both highly Si-compatible. However, on the nanometer scale, these materials start to reach their physical limitations in terms of next-generation device requirements, especially in terms of leakage current, dielectric constant, conductivity and 3D-conformaility. Therefore, great efforts have been and are being undertaken in the investigation of new materials. Here, atomic layer deposition (ALD) has emerged as a versatile deposition technique able to cope with the demand for atomically thin films and nanostructures. Pt-group metals, such as platinum (Pt), iridium (Ir), palladium (Pd) and ruthenium (Ru), are catalytic in nature and are widely used in heterogeneous catalysis, but they can also be applied as electrodes in microelectronic devices. ALD of these metals yields high-quality films and benefits from excellent thickness control at the atomic level. However, the ALD processes still call for further optimization and tailoring of the film properties. To this end, Ru ALD using a metalorganic precursor and O2 as a co-reactant was selected for investigation in this dissertation. The work of this dissertation can be divided into three distinct parts. The first part includes the deposition of Ru-films with O2 gas and O2 plasma, and a comparison of both Ru ALD processes and the respective material properties. The second part presents the use of in situ spectroscopic ellipsometry as a means to determine the Pt, Pd and Ru film thicknesses that evolve during ALD growth. The third part deals with the investigation of the surface chemistry SUMMARY 152 leading to Ru film growth, which could serve as a representative benchmark for ALD growth mechanisms of other Pt-group metals. This dissertation has focused on Ru ALD using (C5H5)Ru(CH2CH3)(CO)2, also written as CpRuEt(CO)2, as a precursor. In most experiments O2 was used as a co-reactant and the process can serve as a model system for other Ru ALD processes using metalorganic precursors and O2. The O2-gas based process was compared with the O2-plasma based ALD process in terms of thickness increase, nucleation delay and the material properties investigated included the resistivity, the mass density, the crystal orientation and the film roughness. The thermal and plasma-assisted ALD processes delivered high growth per cycle values (~1 Å/cycle) which were found to be a clear benefit of these ALD processes compared to other existing processes using different precursors. With the plasma-assisted process the nucleation delay could be reduced considerably, however, at the expense of a high surface roughness of the films. Therefore, the thermal ALD process with O2 gas was chosen as the main research topic in this thesis. In order to monitor the film growth in situ, the growth of Ru, Pt and Pd films was studied by spectroscopic ellipsometry (SE). To take into account the change in dielectric function of metal films below 10 nm in thickness, the data were parametrized using polynomial base functions. This variational parametrization of the SE data allowed the observation of the initial incubation time characteristic for ALD of metals. Not only could accurate thickness values be extracted but also the dielectric functions of the films could be retrieved from the parametrization at any stage of the metal deposition. Furthermore, by adding Fourier-transform infrared reflectance data to the SE data, it was possible to probe the optical conductivity of the film and to obtain a unique oscillator- based parametrization of the three types of metal films. Most of these values, conductivities and oscillator parameters, were in agreement with previous reports. The surface science and catalysis community has provided a vast amount of information on the surface reactions occurring on (O-covered) Ru surfaces. One approach adopted in this dissertation was to apply insights on the Ru surface chemistry gained from the available literature to the experimental data obtained during the Ru ALD process. Basic properties of Ru surfaces were introduced and specific reactions relevant to the reaction mechanism were reSUMMARY 153 viewed. Surface reactions on Pt-group metal surfaces can be quite complex due to their unique electronic d-band structure which can lead to the dissociative chemisorption of adsorbing gaseous species, such as O2 and CxHy. An example of the latter is the liberation of H2 as a result of surface dehydrogenation reactions and the carbon layer remaining on the Ru surface, once the dehydrogenation reactions are terminated. Quadrupole mass spectrometry (QMS), including experiments with the oxygen isotope 18O2, was used to probe the gas-phase products originating from the surface reactions during Ru thermal ALD. In agreement with other Ru ALD studies, it was found that the process relies on the dissociative chemisorption of O2 on the surface during the oxygen exposure. The resulting surface Oatoms are reactive enough to combust the hydrocarbon ligands to CO2 and H2O. These combustion products were also observed during the precursor pulse confirming the presence of O on the metal surface at the start of the ALD cycle. In addition to breaking O-O bonds, the QMS data substantiated that the metal’s catalytic activity was also responsible for the scission of C-H bonds of the hydrocarbon ligands adsorbed at the surface. These C and H atoms were formed to be either oxidized to CO2 and H2O or the H atoms desorbed from the surface as H2. This finding implies that the overall reaction mechanism of Ru ALD can be summarized by catalytic combustion reactions, occurring in each half-reaction. These reactions consist of the dissociative chemisorption of specific species on a catalytic surface (organic ligands during the Ru pulse, and oxygen in the O2 pulse) accompanied with the combustion of C- and H-rich species by the oxygen atoms at the surface. This dissertation has highlighted various facets of Ru ALD which most likely hold for ALD of Pt-group metals in general. The results and conclusions presented and derived in this thesis work are important to probe and control film growth of Pt-group metals by ALD.
