Atomic layer deposition of metals and metal oxides: towards the synthesis of bimetallic materials
- Author
- Ranjith Karuparambil Ramachandran
- Year
- 2017
- Abstract & Cover
- Source of Information
- CoCooN website, www.cocoon.ugent.be
- University
- Ghent University, Department of Solid State Sciences, CoCooN research group (Ghent, Belgium)
- External Link
- Read Thesis
Atomic Layer Deposition (ALD), a thin film deposition technique, has revolutionized the field of semiconductor industry. By now, ALD has emerged as a powerful deposition tool in various other fields such as catalysis, photovoltaics, sensors, polymers, fuel cells and batteries. In particular, in the field of heterogeneous catalysis, it is now emerging as an impressive method for designing and modifying the catalysts (and catalyst supports) at the nanoscale level through precise control over the structure and composition. This thesis work can be divided into three parts: 1) developing new processes for the ALD of metals and metal oxides, that are relevant for catalysis, 2) developing a method for the synthesis of bimetallic materials, containing both noble and non-noble metals, by combining different ALD processes and finally 3) testing the feasibility of the developed methods in supported catalyst preparation. Since different ALD processes have to be eventually combined for the synthesis of bimetallic materials, processes with wide ALD temperature window were targeted when developing the processes. The newly developed ALD processes are described in chapter 3 of this thesis. In total four ALD processes have been developed for the deposition of metallic Pt and the oxides of Ga, In and Fe, which are of importance in the field of catalysis, especially for hydrocarbon conversion reactions. A very well-known Pt precursor, Me3PtCpMe, is used for the Pt ALD in combination with ozone as reactant. Compared to the existing Pt ALD processes, this novel process enables the deposition of metallic Pt at very low temperatures ranging from 100 - 300 C. This could be beneficial for the deposition of Pt on temperature sensitive materials. Another cyclopentadienyl based precursor called tertiary-butyl ferrocene (TBF) is used in combination with oxygen plasma for the deposition of iron oxide. The advantage of this precursor over the commonly used ferrocene precursor is that it is a liquid and vaporizes at lower temperatures. Gallium and indium oxides are deposited using -diketonate based precursors, Ga(TMHD)3 and In(TMHD)3, respectively. The exceptional stability and low cost make -diketonate precursors highly interesting. Both processes use O2 plasma as reactant and exhibit a wide temperature window of 100 - 400 C. The second goal of this thesis work was to develop a new method for the synthesis of different bimetallic materials by combining respective ALD processes. Supported Pt nanoparticles alloyed with In, Ga or Sn have proven to be highly selective catalysts for the dehydrogenation of propane to propylene. In particular, a Pt-Sn-based catalyst is used worldwide in the industrial dehydrogenation process Oleflex (UOP). However, despite the success of current dehydrogenation technologies, there are still opportunities for further enhancement of the catalyst stability and efficiency. This requires an in-depth understanding of the relation between the structural and electronic properties of the alloyed Pt phase and the catalytic performance. Such insights are closely related to the availability of methodologies that can tailor the composition and morphology of the bimetallic catalysts at the atomic scale. Even though ALD has shown its potential for the synthesis of bimetallic materials, so far it has been limited to the synthesis of bimetallic alloys containing only noble metals. The main challenge here is the lack of favorable ALD chemistries for the deposition of non-noble metals like Ga, In etc. in their elemental state. In this work, a novel ALD based methodology is developed for the controlled synthesis of bimetallic alloys containing both noble and non-noble metals. In this synthesis method, first a bilayer consisting of the materials of interest is deposited by ALD, which is then subjected to a temperature programmed reduction (TPR) under hydrogen atmosphere. Real time information on the formation of different bimetallic alloy phases can be obtained by using in situ X-ray diffraction measurements during TPR. A detailed description of this novel method is given and demonstrated by taking Pt-In and Pt-Ga systems as examples. Finally, the feasibility of the developed methods (ALD and bimetallic synthesis) in synthesizing different supported catalyst materials was investigated. Pt ALD was employed for introducing Pt into a ZSM-5 zeolite support for the synthesis of a bifunctional catalyst. In a second experiment, catalytic activity was induced in a purely siliceous -COK-14 zeolite by introducing catalytically active acidic gallium species by gallium oxide ALD. Both these catalysts were then tested for decane hydroconversion reaction. A Pt-In bimetallic catalyst was prepared in a mesoporous silica support by employing the newly developed bimetallic synthesis method and was tested for the well-known propane dehydrogenation reaction. The details of the catalytic experiments are reported in chapters 3 and 4 respectively.
