Atomic Layer Deposition of Earth Abundant Electrocatalysts for the Oxygen Evolution Reaction

Author
Katie Pickrahn
Year
2015
Abstract & Cover

Due to its intermittent nature, large-scale adoption of solar energy requires new  technological advancements to efficiently store and distribute energy. The  photoelectrochemical (PEC) splitting of water is a promising way to capture solar energy  and store it in the form of chemical bonds. Materials challenges have hampered the  implementation of this technology; however, nanostructuring offers new avenues to  improve the efficiency and stability of PEC devices. Fine control over the fabrication of  the devices is needed, particularly when characterizing new structures.  Atomic layer deposition (ALD) is a thin film fabrication technique that provides  the needed atomic-scale control over film deposition. It consists of a series of alternating,  saturated, self-limiting reactions that deposit up to a single monolayer of atoms at a time.  We look at leveraging the advantages of ALD, a technique well known in the  microelectronics industry, to address some of the most pressing issues in PEC water  splitting. In particular, the focus of our studies is the development of catalysts to drive  the oxygen evolution reaction (OER), a reaction typically associated with high  overpotentials and sluggish kinetics. We focus on using ALD to manage charge transport  limitations and enhance surface area to create high turnover frequency (TOF) catalysts  made of earth-abundant materials.  We explore the OER activity of first-row transition metal oxide catalysts  deposited by ALD. Many semiconducting metal oxides are promising materials for OER  catalysts because of their high stability and low cost. Charge transport, however, may  mask the activity of the surface of these semiconducting catalysts. In a collaboration  between theory and experiment, we explore the effect of charge transport limitations on  the characterization of electrocatalysts, using TiO2 as a model material. We find that  beyond a critical thickness of ~4 nm, charge transport limitations mask the activity of the  catalyst. These findings are expanded to predict the critical thickness at which charge  transport become limiting for other semiconducting metal oxides as well. We then  explore Ti-Mn oxide mixtures using thin films fabricated by ALD because the activity of  vi! !  this material system is sensitive to charge transport limitations. We deposit samples with  thicknesses between 1.4 and 2.8 nm and characterize the impact of composition on the  electrochemical activity of the Mn active sites. We find that the TOF of the Mn sites  increases with decreasing Ti concentration, changing by approximately one order of  magnitude. Increasing the thickness of the films is found to mask the activity of the  surface. ALD, which allows for the formation of thin mixed-metal-oxide films that can  minimize charge transport limitations, is shown to provide an excellent synthesis  technique for the exploration of new catalysts.  We also investigate known active transition metal oxide catalysts, exploring how  to enhance their activity with higher surface area and through electronic effects. First, we  study ALD-MnOx as an OER catalyst. We demonstrate that ALD-MnO is an active  electrocatalyst for OER, comparable to the best MnOx OER catalysts. Using X-ray  absorption spectroscopy, we show that ALD-MnO oxidizes under OER conditions to an  active Mn3+/4+ oxide. A slight enhancement in activity is observed with annealing to  Mn2O3, which can be attributed to an increase in surface area. Utilizing ALD’s ability to  deposit conformal thin films, we deposit ALD-MnO on nanostructured substrates and  observe more than a threefold increase in the amount of current density at a given  overpotential due to the increase in surface area. Second, we study ALD-NiO as an OER  catalyst. We use an Fe-rich electrolyte to activate the catalyst for OER, and compare it to  catalysts tested in Fe-trace electrolyte. We find that while the sample tested in an Fe-rich  electrolyte has a high TOF, the Fe appears to inhibit the restructuring of the catalyst that  allows for higher surface area. Using a two-step electrolyte conditioning procedure, we  are able to create NiOx-based catalysts with both high TOF and high surface area.  Managing the effect of surface area is especially important when depositing dense, low  surface area, oxide films by ALD. Integration of these catalysts into PEC devices will be  discussed, with an emphasis on the role of stability, oxidation, and surface area in  enhancing the OER activity for photoanodes.  

Source of Information
Stanford Libraries
University
Stanford University
(Stanford, USA)
External Link
Read Thesis
LinkedIn
linkedin invite