Atomic Layer Deposition of Cobalt

Author
Han-Bo-Ram Lee
Year
2009
Thesis name in original language
코발트 원자층 박막 증착법
Abstract & Cover

With device scaling down, metal deposition techniques with high conformality are required for contact fabrication. Since atomic layer deposition (ALD) has many advantages such as high conformality and atomic thickness controllability, it is suitable for nanoscale contact fabrications. In this study, Co ALD has been developed by using several Co precursors, CoCp(CO)2, CoCp2, and Co(iPr-AMD)2, and reactants, gas and plasma, and then studies on fundamentals and applications were performed. Co films were not deposited from thermal ALD (TH-ALD) using NH3 and H2 gas as a reactant while plasma enhanced ALD (PE-ALD) produced pure Co films by using NH3 plasma. For PE-ALD, CoCp2 showed better film quality and more suitable growth characteristics for ALD growth than CoCp(CO)2. The resistivity was very low, down to 10 μΩcm for PE-ALD Co from CoCp2. Quadrupole mass spectroscopy (QMS) and synchrotron radiation X-ray reflectivity (SR-XRR) were employed to investigate growth mechanism and initial growth of PE-ALD Co. The results showed that an interlayer was formed between PE-ALD Co and Si substrate, and the interlayer was a key role of Co deposition. In addition, the Co was grown by island growth during the initial growth stage but not layer by layer growth. The results on the interlayer from ellipsometry and transmission electron microscopy (TEM) were consistent with QMS and SR-XRR results, which indicated that the interlayer was amorphous SiNx, and it was formed due to direct exposure of NH3 plasma to Si substrate. In addition, the epitaxial CoSi2 was obtained from annealing of PE-ALD Co. The epitaxial growth was correlated with the presence of a-SiNx interlayer, in other words, the epitaxial CoSi2 was formed through interlayer mediated epitaxy mechanism. For Co(iPr-AMD)2 precursor, pure Co films were obtained by TH-ALD as well as PE-ALD. TH-ALD produced excellent conformal Co films in nanosize contact holes up to 95 % of step coverage. Co films deposited by TH-ALD with NH3 as a reactant showed superior film properties such as high density and low resistivity to that with H2. PE-ALD Co and TH-ALD Co were applied to area selective ALD (ASALD) by using octadecyltrichlorosilane (OTS) self-assembled monolayers (SAMs) for novel contact fabrications. No deposition selectivity was observed in PE-ALD Co because OTS was rapidly degraded by NH3 plasma exposure. In contrast to PE-ALD, AS-ALD was successfully achieved by using TH-ALD Co. By using patterned OTS substrate, Co line patterns with 3 μm-width were obtained without etching process. 

Source of Information
Pohang University of Science and Technology (POSTECH)
University
Pohang University of Science and Technology (POSTECH)
(Pohang, Korea)
External Link
Read Thesis
LinkedIn
linkedin invite