Atomic layer deposition for 2-D materials beyond graphene
- Author
- A. Sharma
- Year
- 2018
- Abstract & Cover
- University
- Eindhoven University of Technology (Eindhoven, Netherlands)
- External Link
- Read Thesis
The landmark invention of graphene in 2009 by Geim and Novoselov has stimulated the exploration of other 2-D materials beyond graphene in a quest for future generation nano-electronics. Besides graphene, molybdenum disulphide (MoS2), a natural semiconductor, is one of the most studied layered nanomaterials because of its earth abundance, stability in ambient and direct band gap in the monolayer regime. This makes MoS2 an interesting candidate for future (opto-)electronics applications. Additionally, when the MoS2 basal planes are oriented out-of-plane, the active edge sites of the basal planes provide a unique opportunity for electrocatalytic applications. However, the synthesis and precise control over the thickness and morphology of these layers at the nano-scale over large areas is still a major challenge. Atomic layer deposition (ALD) is a preparation method for thin films which offers a precise thickness control down to a sub-monolayer and is instrumental for synthesis of 2-D materials. Therefore, the focus of this thesis is to explore the potential of plasma-enhanced ALD (PEALD) process, both in direct and indirect way, for synthesis of 2-D MoS2 over large area with precise thickness control. In Chapter 3, a low-temperature plasma-enhanced ALD (PEALD) process was presented to synthesize large area, uniform mono-to-few layered MoS2 films. The characteristic self-limiting ALD growth with a growth-per-cycle of 0.1 nm/cycle and precise thickness control down to a monolayer combined with excellent wafer scale uniformity was demonstrated. The transformation in film morphology from in-plane 2- D to out-of-plane oriented 3-D layers as a function of growth temperature was observed. A model based on high-resolution transmission electron microscopy analysis was hypothesized to elucidate the film morphology transformation at 450 C. Therefore, an excellent control not only over thickness but also over morphology could be attained, which was showcased in electrocatalysis where out-of-plane oriented films outperformed in-plane oriented films. The surface wettability of out-of-plane oriented films can play a crucial role in determining its electrocatalytic properties e.g. hydrogen evolution reaction (HER). It was demonstrated in Chapter 4 that the tuneable wettability of MoS2 nanostructures could be attained in a facile way by modulating the plasma gas composition and application of substrate bias (mainly affecting ion energy) during the PEALD process. While a wide range (109° - 133°) of tuneable water contact angles (WCA) was obtained on SiO2/Si substrates, a close to superhydrophobic (~146°) WCA was achievable on HER relevant carbon fibre paper substrates. Apart from the out-of-plane oriented films, amorphous molybdenum sulphide (MoSx) films synthesized by PEALD also deliver excellent HER performance, shown in Chapter 5. A high current density (10 mA/cm2 ) at low overpotential (~ 235 mV) for predominantly amorphous MoSx films was achieved. A detailed analysis using X-ray photoelectron spectroscopy and extended X-ray absorption fine spectroscopy (EXAFS) allowed to conclude that the change in structural properties of MoSx film synthesized at 250°C compared to nano-crystalline material synthesized at higher temperature results in better HER performance. Another approach to synthesize high quality, patternable MoS2 ultra-thin films by combining PEALD and thermal sulphurization was also explored in chapter 6. In this case, low temperature PEALD (50C) was first used to deposit MoOx ultra-thin films. Subsequently, a high temperature (900C) sulphurization process using a H2S+Ar gas mixture was used to sulphurize MoOx films. The in-plane, layered morphology variant of MoS2 with strong photoluminescence signal from a monolayer was obtained. Large area uniformity and excellent conformality over high aspect ratio trench structures were displayed. The low temperature processing during the first step allowed the use of electron beam lithography to pattern MoOx islands with high fidelity. These MoOx islands were sulphurized to yield patterned MoS2 on device ready SiO2/Si substrates and thus eliminating any need for etching and/or transfer. The thickness of the final MoS2 patterns could systematically be controlled just by tuning the number of ALD cycles for the parent MoOx films. For device integration, the deposition of high- dielectrics on MoS2 has been demonstrated as a crucial step. A PEALD process using a combination of a heteroleptic precursor and O2 plasma for depositing HfO2 thin films was investigated in chapter 7. An extensive film characterization was carried out which revealed that both amorphous and polycrystalline HfO2 films could be deposited depending on the deposition temperature. The film conformality was also assessed on 3-D high aspect ratio nanostructures In conclusion, it has been demonstrated that ALD is a viable technique to deposit high quality, large area MoS2 with an excellent control over both thickness and morphology and therefore this technique is potentially extendable to other 2-D materials. Most of this thesis work has been or will be published in peer-review scientific journals, and provides opportunities for future integration of MoS2 in devices for a broad range of applications.
