Manufacturer
SVT Associates, Inc.
Product model
Northstar 100B
Type of product
100 mm R&D ALD system
Description

SVT Associates’ Atomic Layer Deposition (ALD) system is a versatile research deposition tool for thermal or energy-enhanced ALD. With up to 8 precursor lines and a hot wall deposition chamber, a wide range of applications may be performed by a single system. Sample introduction is rapid and convenient with a quick hatch or the optional load lock. SVT Associates’ ALD system can be interfaced with other deposition and metrology tools. Integration of in-situ metrology tools and the RoboALD™ software/system automation increases process reproducibility. Fully UHV Upgradeable. Demo and deposition services are available.

Some scientific articles where the Northstar has been used can be found here.

Applications:

  • High-k Dielectrics 
  • Nanocoatings
  • MEMS
  • Photonic Crystals 
  • Diffusion Barriers 
  • Device Encapsulations 
  • Surface Modification Layers
Technical features

ALD REACTOR MODULE


Reactor Chamber
• Up to 4" (100 mm) Wafer Capacity
• Optional Hot Wall Chamber Design – Temperature Controlled
• (UHV Compatible version available)
• Gas Inlet Injection Port for Precursor Manifold(s)
• Close Coupled Sample Heater to 350 C (500 C with Hot Wall Option)
• Pumping Port
• Provision for Quartz Crystal Monitoring and RGA
Reactor Pumping
• Dual Stage Rotary Vane Pump – 5 cfm (8.5 m3/hr)
• Heated Pumping Line Isolated with Valve
• Hot trap and Particle Filter, in Pumping Line
• Oxygen service and Dry Pump Pumping Options Available
Base Pressure
• <3 x l0-3 Torr or better with standard pumping
Vacuum Gauge
• Baratron® Gauge
Electronics
• Control Electronics
• Sample Heater Power Supply and Controller
• Chamber walls Heater Power Supply, Thermocouple and
Temperature Controller
• Gas Line Heater Power Supply,
• Thermocouple and Temperature Controller
ALD Console
• Clean Room Compatible Metal Enclosure
Safety
• Software safety interlocks
• Door Interlocks
• Low voltage Emergency Off (EMO)
• Single point power connection
 

PRECURSOR MANIFOLD(S)


Carrier Gas Line
• Common Line to ALD Valves (Typically Ar) with Mass Flow Controller
Precursor Admission
• Precursor sources from Liquid, Solid, or Gas phase
• Heated Precursor Manifold with up to 4 Precursors Each
• (Option for second Manifold for up to 8 Precursors)
• Fast ALD High Temp Valves (15 msec)
• Metal VCR® fittings
• Gas Line Heating to 200 C
 

PROCESS CONTROL


Robo-ALD™
• Software and Firmware – PLC
• Based on NI LabVIEW® platform
• Recipe Entry and Operation Loops
• Logging of parameters – T, P, Flow, (Optional RGA)
• Log files can be exported to Excel®
• Automated pumpdown / vent to atmosphere Deposition Uniformity
• < ± 1 % over 100 mm – Reference – Al2O3, thickness > 20 nm Deposition Mode
• Standard, or “soak” mode for high aspect ratio samples
 

LOAD LOCK (OPTIONAL)


Load Lock Chamber
• 100 mm Wafer Capacity
• Magnetic Transfer Rod, Manual Gate Valve
• Pumping, Venting, and Vacuum Gauge
 

PLASMA SOURCE (OPTIONAL)
• Inductively Coupled Plasma Source
• RF Generator and Tuning Network
• Qty (2) MFC (Options for additional Gases)
• O2, N2, H2 Compatible
 

EXTERNAL SERVICES


Electrical Service
• 220/380 VAC, 50A, Single or Three Phase, 50-60 Hz
COMPRESSED AIR/N2/Ar Valve Manifold
• 75 PSI CDA at 0.1 cfm (500 kPa at 2.8 liter/min) pressure regulated
• Relative humidity < 20% Dry N2 may be substituted
Carrier Gas
• 5 PSI (35 kPa) Research Grade N2 or Ar
• Also used to vent reactor
Exhaust
• Vacuum Pump and Cabinet
 

COOLING WATER


Reactor Chamber
• 2 l/minute at approx. 20 C, or a water chiller when outer chamber wall is run >150 C

 

SVTA Northstar model 100B detailed specifications

Product Links
SVT Associates, Inc. Northstar 100B manufacturer page
LinkedIn
linkedin invite